- Title
- Failure analysis and structural reliability of unreinforced masonry veneer walls: Influence of wall tie corrosion
- Creator
- Muhit, Imrose B.; Masia, Mark J.; Stewart, Mark G.
- Relation
- ARC.DP180102334 http://purl.org/au-research/grants/arc/DP180102334
- Relation
- Engineering Failure Analysis Vol. 151, Issue September 2023, no. 107354
- Publisher Link
- http://dx.doi.org/10.1016/j.engfailanal.2023.107354
- Publisher
- Elsevier
- Resource Type
- journal article
- Date
- 2023
- Description
- Corrosion appears to be a very common problem in historical and aged structures with steel ties and anchorages. A potential rapid deterioration of the wall tie due to the corrosion leading to a premature structural failure poses a serious threat to the built heritage infrastructures’ safety. This paper describes an overview of the probabilistic failure analysis of the unreinforced masonry (URM) veneer wall system with flexible backup under uniformly distributed out-of-plane loadings. Moreover, a framework is proposed to consider the wall tie corrosion in the stochastic finite element analysis (FEA) while estimating the structural reliability. A probabilistic experimental study where 18 full-scale URM veneer wall systems with theoretically identical geometries and properties were tested under inward and outward lateral loading. Wall failure statistics along with the probabilistic characterisation of veneer wall constituent materials including mortar, wall tie and timber were accomplished. A stochastic computational model was then developed which combines the FEA and Monte Carlo simulation to evaluate the failure progression and system peak load (veneer capacity) while considering the spatial variability of veneer wall material properties. Two scenarios, with and without wall tie corrosion, are considered, and the probabilistic characterisation of the veneer capacities for these scenarios under inward and outward out-of-plane loading is also reported. The model error statistics were combined with the probabilistic load models to determine the reliability index corresponding to the Australian Standard for Masonry Structures AS 3700. Annual reliabilities are compared to target reliabilities recommended by ISO 2394. Capacity reduction factor and design minimum tie strength consideration for corroded wall tie is also discussed.
- Subject
- corrosion; historical; masonry; veneer; wall tie; spatial variability
- Identifier
- http://hdl.handle.net/1959.13/1483001
- Identifier
- uon:51065
- Identifier
- ISSN:1350-6307
- Language
- eng
- Reviewed
- Hits: 386
- Visitors: 385
- Downloads: 0
| Thumbnail | File | Description | Size | Format |
|---|