- Title
- Experimental investigation of the influence of confining stress on hard rock fragmentation using a conical pick
- Creator
- Li, Xibing; Wang, Shaofeng; Wang, Shanyong
- Relation
- Rock Mechanics and Rock Engineering Vol. 51, Issue 1, p. 255-277
- Publisher Link
- http://dx.doi.org/10.1007/s00603-017-1309-9
- Publisher
- Springer
- Resource Type
- journal article
- Date
- 2018
- Description
- High geostress is a prominent condition in deep excavations and affects the cuttability of deep hard rock. This study aims to determine the influence of confining stress on hard rock fragmentation as applied by a conical pick. Using a true triaxial test apparatus, static and coupled static and dynamic loadings from pick forces were applied to end faces of cubic rock specimens to break them under biaxial, uniaxial and stress-free confining stress conditions. The cuttability indices (peak pick force, insertion depth and disturbance duration), failure patterns and fragment sizes were measured and compared to estimate the effects of confining stress. The results show that the rock cuttabilities decreased in order from rock breakages under stress-free conditions to uniaxial confining stress and then to biaxial confining stress. Under biaxial confining stress, only flake-shaped fragments were stripped from the rock surfaces under the requirements of large pick forces or disturbance durations. As the level of uniaxial confining stress increased, the peak pick force and the insertion depth initially increased and then decreased, and the failure patterns varied from splitting to partial splitting and then to rock bursts with decreasing average fragment sizes. Rock bursts will occur under elastic compression via ultra-high uniaxial confining stresses. There are two critical uniaxial confining stress levels, namely stress values at which peak pick forces begin to decrease and improve rock cuttability, and those at which rock bursts initially occur and cutting safety decreases. In particular, hard rock is easiest to split safely and efficiently under stress-free conditions. Moreover, coupled static preloading and dynamic disturbance can increase the efficiency of rock fragmentation with increasing preloading levels and disturbance amplitudes. The concluding remarks confirm hard rock cuttability using conical pick, which can improve the applicability of mechanical excavation in deep hard rock masses.
- Subject
- rock fragmentation; confining stress; conical pick; cutting capacity; failure; size statistics
- Identifier
- http://hdl.handle.net/1959.13/1453668
- Identifier
- uon:44704
- Identifier
- ISSN:0723-2632
- Language
- eng
- Reviewed
- Hits: 481
- Visitors: 475
- Downloads: 0
| Thumbnail | File | Description | Size | Format |
|---|