Please use this identifier to cite or link to this item: http://hdl.handle.net/1959.13/933705

OpenURL Link
Title
Micromechanics of wear and its application to predict the service life of pneumatic conveying pipelines
Author/Creator
Cenna, A. A.;  Pang, Kim;  Williams, K. C.;  Jones, M. G.
Institution
The University of Newcastle. Faculty of Engineering & Built Environment, School of Engineering
Description
Pneumatic conveying involves the transportation of a wide variety of dry powdered and granular solids through pipeline and bends using high pressure gas. It is a frequently used method of material transport particularly for in-plant transport over relatively short distances. This is primarily to exploit the degree of flexibility it offers in terms of pipeline routing as well as dust minimization. Approximately 80% of industrial systems are traditionally dilute phase system which uses relatively large amount of air to achieve high particle velocities to stay away from trouble, such as blocking the pipeline. However, for many applications higher velocities lead to excessive levels of particle attrition or wear of pipelines, bends and fittings. To combat these problems, there are systems designed to operate at relatively low velocity regimes. Yet one problem remains as a major issue with these conveying systems which is wear. In pneumatic conveying, service life is dictated by wear in critical areas of the pipelines and bends due to higher interaction between the particles and the surface. Depending on the conveying conditions or modes of flow, wear mechanism can be abrasive or erosive or a combination of both. Recent developments in predictive models of wear of materials showed that by using the particles energy dissipated to the surface and the surface material properties, it is possible to predict the overall material loss from the surface. Material loss from the surface is then can be converted to determine the pipeline thickness loss that can be used to indicate the service life of the pipeline. In this paper wear mechanisms in the critical wear areas of pneumatic conveying pipeline have been analysed. Based on the wear mechanisms, predictive models have been selected from the literature. A number of factors have been incorporated to apply the model into pneumatic conveying processes. Conveying tests were performed in the laboratory to determine the time to failure as well as gradual thickness loss in the bend. Finally experimental results have been compared the model output and the variations have been analysed for further improvement of the models.
Relation
4th World Congress on Engineering Asset Management (WCEAM 2009). Proceedings of the 4th World Congress on Engineering Asset Management (Athens, Greece 28-30 September, 2009) p. 264-272
Publisher Link
http://dx.doi.org/10.1007/978-0-85729-320-6_31
Date
2010
Publisher
Springer
Keyword(s)
wear;  abrasive;  erosive;  pneumatic conveying
Resource Type
conference paper
Identifier
http://hdl.handle.net/1959.13/933705
Identifier
ISBN:9780857293213
Reviewed
Reviewed
4 Visitors 5 Hits 0 Downloads
Save/E-mail Citation
Citation Format
E-mail Address
Subject
"Micromechanics of wear and its application to predict the service life of pneumatic conveying pipelines"
 
OR